944 Forum
944 Forums >> 944 S 2.5 >> Would changing clutch blow the clutch master cyl?
https://www.944online.com/cgi-bin/yabb2/YaBB.pl?num=1545367922

Message started by Charlie0328 on Dec 21st, 2018 at 4:52am

Title: Re: Would changing clutch blow the clutch master cyl?
Post by XxSteve944onlinexX on May 22nd, 2020 at 7:22pm
it is very important when bleeding the clutch cylinders to release some tension on the clutch pedal clevis to allow to valve in the master to fully open and close.

I would recommend checking the clutch hoses between the cylinders. If you bled them and they held pressure but after 75 pumps you had air again makes it sound like you have some pinholes in either the rubber portion of the hose or the metal part.

Also if you plan on rebuilding your slave I would recommend taking it apart first before ordering the kit because if your cylinder has any pitting inside the seal kit will not last very long if it seals at all.

944 Forum » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2020. All Rights Reserved.