944 Forum
944 Forums >> 944/2 >> 1986 944 No start
https://www.944online.com/cgi-bin/yabb2/YaBB.pl?num=1564626249

Message started by 944Thomas on Aug 1st, 2019 at 2:24am

Title: Re: 1986 944 No start
Post by Ky951 on Aug 8th, 2019 at 5:43pm
My understanding is if you are getting no tach bounce, the problem is the reference sensor.  Sounds like you have good resistance numbers, but the problem is likely the output.  Check out this info from Clarks Garage.

http://www.clarks-garage.com/shop-manual/ign-02.htm

944 Forum » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2019. All Rights Reserved.