Page Index Toggle Pages: 1 Send TopicPrint
944 S - 944 S2 - 968 cam specs (Read 3286 times)
IAN - 944ONLINE
Global Moderator
*****
Offline



Posts: 9370
Joined: Apr 26th, 2005
Gender: Male
944 S - 944 S2 - 968 cam specs
Dec 12th, 2012 at 12:57pm
Print Post  
944 s 2.5
intake opens 4 degrees after TDC
intake closes 40 degrees after BDC
exhaust opens 36 deg before BDC
exhaust closes 4 deg before TDC
----------------------------------------------------------------
944 S2 3.0
intake opens  3  deg after TDC
intake closes 47 deg after BDC
exhaust opens 39 deg before BDC
exhaust closes 7 deg after TDC
--------------------------------------------------------------
968 - BASIC TIMING
intake opens 7.5 deg after TDC
intake closes 52 deg after BDC
exhaust opens 31 deg before  BDC
exhaust closes 1 deg before TDC

968 - TORQUE TIMING
Intake opens 7.5 deg after TDC
intake closes 37 deg after BDC
exhaust opens 31 deg before  BDC
exhaust closes 1 deg before TDC

from what I understand on the  968 as its a vario cam engine
the difference between BASIC and TORQUE timing
is this 
Basic would be if you had the engine on a stand 

and Torque is the timing that is when the engine is running and under the control of the vario system

also 
the physical dimensions of these cams are all the same as far as length -  position of sprocket - and position of the journals where the cams mount-
hope this helps 
and I'
ll also post this info in the TECH section

Ian
  

e mail&&ian@944online.com&&phone&&toll free in the USA 1 866 944 7883&&outside the USA&&1 954 968 3766&&FAX -1 954 968 3798
Back to top
WWWYIM  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
Bookmarks: del.icio.us Digg Facebook Google Google+ Linked in reddit StumbleUpon Twitter Yahoo
 
  « Board Index ‹ Board  ^Top