Page Index Toggle Pages: 1 Send TopicPrint
Drivers Window not fully closing (Read 936 times)
SteveSowka
New Member
*
Offline


944

Posts: 2
Joined: Jun 11th, 2018
Drivers Window not fully closing
Jun 11th, 2018 at 1:16pm
Print Post  
Hi,

My drivers side window will not close fully, it seems to bind towards the top, its open still by an inch or so, how can I fix?

Thanks

Steve
  
Back to top
 
IP Logged
 
green mountain crusier
Junior Member
**
Offline


944

Posts: 70
Joined: Feb 5th, 2015
Re: Drivers Window not fully closing
Reply #1 - Jun 12th, 2018 at 2:06pm
Print Post  
I'm no expert but I would very carefully remove the door card and examine the mechanism and track. Maybe you will be able to find the problem.
  
Back to top
 
IP Logged
 
SteveSowka
New Member
*
Offline


944

Posts: 2
Joined: Jun 11th, 2018
Re: Drivers Window not fully closing
Reply #2 - Jun 13th, 2018 at 1:14pm
Print Post  
I have taken the card off, nothing obvious.

I will dig out a tech guide or forum add re adjustment screws, just cant seem to find at the mo.
  
Back to top
 
IP Logged
 
Catellus Engineering
Junior Member
**
Offline


944

Posts: 52
Joined: Mar 15th, 2016
Re: Drivers Window not fully closing
Reply #3 - Jun 14th, 2018 at 12:17am
Print Post  
Try removing, cleaning, lubricating the window regulator. Clean the three guides its three rollers run along. Replace the rollers if they are damaged, using the Rennbay kit.

Pelican has a good how-to article. Good luck!
  

Kevin
Catellus Engineering, Inc.
catelluseng@gmail.com
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
Bookmarks: del.icio.us Digg Facebook Google Google+ Linked in reddit StumbleUpon Twitter Yahoo
 
  « Board Index ‹ Board  ^Top